9
E N G l I s H
CH 6000
s e r i e s
2. INsTallaTION
FITTING THE BasE
Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. Fit
the bases to the lower part of the appliance. secure the bases to the devices well using the wing
nuts (Fig.1).
Wall- FITTING
C a U T I O N :
• there should be a distance of at least 40 cm between the lower part of the appliance
and the floor.
• the feet must be removed before mounting the appliance on the wall
To drill the holes in their correct locations, use the template included in the last page of this manual.
Fit the metal plate to the wall using the included screws and wall plugs (Fig. 2).
slide the appliance down, fitting it into the metal securing plate until it is well secured (Fig. 3).
C a U T I O N : In order to avoid a hazard due to inadvertent resetting of the thermal cut-out
this appliance must not be supplied through an external switching device such as a timer or
connected to a circuit that is regularly switched on and off by the utility
• allow to cool before touching the device or move it and before cleaning.
• do not use the heater if the power cord or plug is damaged. If the power cord is damaged it must be
replaced by a recognised service agent or other qualified person.
• do not remove the plug from the socket by pulling the cord or the appliance.
• Use the product only for permitted uses. This unit is for domestic use.
• Fantini Cosmi s.p.a. shall not be liable for injuries or damage resulting from noncompliance with the
instructions above.
• To avoid danger of suffocation, keep bubble bag and packaging material away from babies and
children. This bag is not a toy.
Summary of Contents for CH 6000
Page 14: ...S e r i e CH 6000 ...
