OM00020 Rev 2, FP00091, FP00101 Operation Manual
Page
9
of
15
Press
3 times to reach the
PAR
screen. Press
.
Press
1 time to reach the
CFG
screen. Press
.
Press
on the
Set
screen.
Use the
and
arrows to adjust the setpoint. Press
.
Press
3 times to return to the main screen.
Starting the RMC
To start the system, the user must do the following:
Press
.
Press
2 times to reach the
Str
screen. Press
.
When
On
is displayed, Press
.
Turning off the RMC
To turn the RMC off, the user must do the following:
Press
.
Press
2 times to reach the
Str
screen. Press
.
Press
1 time to reach
OFF
. Press
.
Operating Modes
The RMC offers 3 operating modes:
1)
The RMC controls to supply temperature (at the supply CPC) (default)
2)
The RMC controls to an external input thermistor (see External Thermistor, p. 6)
3)
The RMC controls to an internal temperature which is 1°C greater than an external ambient
temperature. Customers may use this functionality to ensure coolant lines are non-condensing.
To select the operating mode, the user must do the following:
Press
.
Press
3 times to reach the
PAR
screen. Press
.
Press
on the
GEN
screen.
Press
on the
StU
screen.
Press
4 times to reach the control sensor screen (
y08
). Press
.
Use the
and
arrows to select the sensor to use (internal [
TI
] or external [
TE
]). Press
.
If above ambient operation is required, press
once, then press
to reach control mode
(y09).
Use the
and
arrows to select the control mode to use (direct [
def
] or a[
Amb
]).
Press
.
Note: mode can only be used when controlling to internal thermistor (TI).
