2
Installation Instructions – ASPEN 1900 Series Mid-Sized Bollard
Installation Instructions – ASPEN 1900 Series Mid-Sized Bollard
ADL141353 www.eaton.com
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
WARNING
Risk of fire/electric shock. If not qualified, consult an
electrician. This equipment to be installed by trained
and qualified personel.
WARNING
Risk of Electric Shock - Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn - Disconnect power and allow fixture to cool
before servicing.
WARNING
Risk of Personal Injury - Fixture may become damaged
and/or unstable if not installed properly.
WARNING
Risk of Burn - Disconnect power and allow fixture to cool
before servicing.
NOTE:
These instructions do not claim to cover all details
or variations in the equipment, proocedure, or
process described, nor to provided directions for
meeting every possible contingency during instal-
lation, operation or maintenance. When additional
information is desired to satisfy a problem not cov-
ered sufficiently for user’s purpose, please contact
your nearest representative.
NOTE:
Care must be taken not to set lighting fixture down
on optical lenses or lift fixture in lens area.
NOTE:
To prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or any
sharp objects. Proper grounding is required to
ensure personal safety.
NOTE:
Specifications and dimensions subject to change
without notice.
NOTE:
Replace removable parts after servicing.
I
MPORTANT:
Read carefully before installing fixture. Retain for future reference.
GENERAL:
Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the
attention of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the
housing to assure you have received the correct material.
SAFETY:
This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
APPLICATIONS:
This lighting fixture is designed for outdoor lighting services, and should not be used in area of limited
ventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior to installation. Do not
expose lighting fixture to rain, dust or other environmental conditions prior to installation. Best results will be obtained if
installed and maintained according to the following recommendations.
IMPORTANT LISTINGS AND CERTIFICATIONS SPECIFIC TO FIXTURE:
z
SUITABLE FOR WET LOCATIONS.
z
SUITABLE FOR GROUND MOUNT ONLY.
z
SUITABLE FOR OPERATION NOT EXCEEDING 40°C AMBIENT
Installation Instructions – ASPEN 1900 Series Mid-Sized Bollard
