SlimScan Full Manual
7
Configuration and Programming Guide
The SlimScan is designed so that the configuration can be changed by
scanning a series of special bar code labels. The configuration will not
be lost when the power is removed from the scanner.
Configuration
To change a parameter, scan the “
Start Configuration
” barcode at the
top of any page, followed by the desired configuration barcodes, and
finally the “
End Configuration
” barcode at the bottom of any page to
save the new settings and return to normal operation.
Default settings are highlighted in bold with an arrow.
STOP!
You probably don’t need to
scan any of these barcodes!
These configuration barcodes can dramatically change the way your
SlimScan works. It’s quite possible for you to end up with a scanner
that doesn’t work if you scan the wrong configuration barcodes, or
change many of these options.
If you get yourself into this situation, the easiest way to recover is to
scan these barcodes from the next page:
1. Start Configuration
2. Return scanner to factory defaults
3. End Configuration
Once you’ve scanned these four barcodes, your SlimScan should be
working again.
Summary of Contents for SlimScan
Page 2: ......
