34
Adjust the Sensitivity:
To adjust the sensitivity of detection, select the level from the
pull-down list.
Activate Motion Detection:
To activate the motion detection, enable the
[Detect
Area]
check box
Actions when Motion Detection is Trigger:
Select what actions will be taken once
the motion detection is triggered in each area.
E-mail: When the motion detection is triggered in this area, send the recorded
video or snapshot to the specific mail address.
FTP: When the motion detection is triggered in this area, send the recorded
video or snapshot to the specific FTP site.
To set the mail account and FTP site, please refer to
Configuration
Event
Handling
Mail&FTP
page.
Save to SD Card: When the motion detection is triggered in this area, record
the video or snapshot into the local SD card.
Log:
If “Save to SD Card” option has been selected for action, you can determine
whether send a message to the specific mail address or FTP site.
E-Mail Subject:
The subject of the E-mail will be sent.
Detection Interval:
The interval time between multiple detections. For example, if the
time set to 10 seconds, when the motion detection is triggered at time 10H:05M:10S,
the next detection will be accepted after 10H:05M:20S. The detections between
10H:05M:10S to 10H:05M:19S will not be accepted.
Note:
The interval time for the “Save to SD Card” action is equal to or longer than 30
seconds.
Enable Motion Detection in Schedule Time:
Enable this option will automatic
activate the motion detection with scheduled time and stop the detection in the other
time. Please refer to
Schedule
page to setup the schedule time.
Recommendation of Motion Detection Area
To ensure the Motion Detection works well, and avoid unnecessary trigger, please
follow the rules to draw the Motion Detection Areas:
The moving object larger than the 50% of the Motion Detection Area, it will be
detected, and the Motion Detection is triggered.
The moving object smaller than the 50% of the Motion Detection Area, it will not
be detected, and the Motion Detection will not be triggered.
Recommend use 3 smaller Motion Detection Areas to replace a large area.
