PlugLink 500G Pass-Through Adapter
13 of 39
Network Management
The PlugLinkAV Power Manager utility software allows you to manually configure a
PlugLink 500G Pass-Through Adapter that is directly connected to your Personal
Computer or to any PlugLinkAV Adapters that are remotely residing on your
PlugLinkAV Home network.
NOTE: The Power Manager Utility software is for all Asoka
PlugLinkAV devices.
Viewing the Device Information (Profile)
Run the PlugLinkAV Power Manager and use the
Profile
screen to view information
on your PlugLinkAV device attached directly to your PC and other PlugLinkAV
devices on your network.
The Profile screen displays the following information:
•
Device Name
•
MAC Address
•
Firmware version of your devices
•
Estimated device transmission rate
To refresh the list of your PlugLinkAV devices, click the
Rescan
button.
NOTE:
Devices set up with a different Network Encryption Key (NEK)
also known as the network password will NOT appear on this list.
