20
310749
7. Point gun into waste pail and trigger gun a few seconds
to relieve pressure that might be in hose.
NOTE:
To minimize splashing, aim gun at inside wall
of empty waste pail.
8.Remove tip and base assembly from gun and
place in flushing fluid pail.
Cleanup
9.Turn power switch ON and slowly align arrow
on sprayer with bucket symbol on Pressure
Control knob until pump starts. Continue
flushing until about 1/3 of flushing fluid is
gone from flushing fluid pail.
10.Turn power switch OFF.
11.Turn Spray/Prime valve to SPRAY.
WASTE
12.Trigger gun into paint pail.
13.Turn power switch ON. Continue to trigger
gun and flush sprayer until all the flushing
fluid is gone from flushing fluid pail.
14.Fill using with pump storage fluid, page 24.
Summary of Contents for 248772 A series
Page 29: ...29 310749 Notes ...
Page 33: ...33 310749 Notes ...
