aslotel 5516C.STA2, Manual

Page: 9 / 14

Page | 9
washbasin, a bath tub or
inside a shower cubicle.
Removing the cover
Fig. 1
– 3

Loosen and remove the
screw on the underside of
the wall holder
(see Fig. 1) .

Swing the transparent
cover upwards and remove
it
(see Fig. 2) .

Remove the rating plate
(see Fig. 3) .
Assembling the wall holder
DANGER
Risk of electric shock
There is the risk of electric
shock if the wall holder or the
appliance comes into contact
with water. Please observe
the following safety
instruction:

In rooms containing a bath
tub or a shower (zone 0,
zone 1), the wall holder
may only be mounted
outside zone 2, acc. to DIN
VDE 0100-701. In the UK
the appliance may not be
installed in the bathroom.
Figs. 4 - 8

To mark the position of the
drill holes hold the wall
holder against the wall.
(see Fig. 5)

Fix the wall holder to the
wall using the screws
supplied.
(see Fig. 5)
Note
For hard wiring directly to
the mains supply guide the
mains supply cord through