26
Customer Care Center
1-800-898-1879
www.askona.com
Installation
Read these instructions carefully and completely
before you install the machine. The installation
should be carried out by a qualified person who
is familiar with all local codes and ordinances for
electrical and plumbing connections.
Cosmetic damage must be reported to your
dealer within five days from the date of purchase.
After unpacking the washer, thoroughly check
the unit for cosmetic damage.
Leveling the machine
It is important that the machine is level to prevent
excessive vibrations during spin cycles. Each foot
of the washer is adjustable, so you can level the
washer on any surface. Once it is level, securely
tighten the lock nuts on the feet to prevent
excessive vibration during spin cycles.
Be sure to tighten the
lock nuts securely
when you level the
machine.
Water supply connection
Since ASKO washers have a built-in heating
element, you only need a cold water inlet. The
connection should be made by someone who
is sufficiently skilled. Use the hose supplied with
the washer. (The inlet hose is marked for correct
connection.) The water pressure must be in the
range 15–146 PSI. A valve should be fitted on the
water supply pipe. If a new supply pipe has been
installed for the washer,
it should be flushed thoroughly to remove any
foreign particles that might clog the filter in the
fill valve.
NOTE!
If the unit is installed on a second storey, follow
local building codes. We recommend installing a
drip pan.
