You can choose whether the door is hung on the
right or the left.
Follow these instructions:
1. Remove the Toe kick.
2. Remove the hinge (two screws).
3. Lift the door up and remove it. Support the door
while doing this.
4. Remove both door pins (top and bottom). Fit
them on the opposite side of the door. Refit
the hinges.
5. Loosen and remove the catch (lift up and pull
out) and the cover plate on the door and the
machine. Swap the catch and the cover plate.
6. Move the plastic plugs on the upper and lower
edges of the door. Use a flat screwdriver to
remove the plugs.
7. Loosen the two screws holding the handle in
place on the door. Push out the two plastic
plugs inside the screw holes on the other side
of the door. Use the two screws to attach the
handle to the other side of the door and press
the plastic plugs into the holes where the
handle was previously fitted.
8. Refit the door by loosening the hinge screws
slightly, affixing the door, and closing it.
Retighten the hinges. Replace the Toe kick.
Item No.: 8090338. Rev. 01. We reserve the right to make changes.
Printed on environmentally-friendly paper that meets the requirements of MIljöförbundet and Naturskyddsföreningen.
27
Customer Care Center
1-800-898-1879
www.askousa.com
Reversing the door
