WARNING!
WARNING - Risk of fire.
Install the clothes dryer according to the
manufacturer's instructions and local codes.
Do not install a clothes dryer with flexible plastic
venting materials. If flexible metal (foil type) duct
is installed, it must be of a specific type identified
by the applience manufacturer as suitable for
use with clothes dryers. Flexible venting materials
are known to collapse, be easily crushed, and
trap lint. These conditions will obstruct clothes
dryer airflow and increase the risk of fire.
To reduce the risk of of severe injury or death,
follow all installation instructions.
Save these instructions for future reference.
Positioning the tumble dryer
The tumble dryer can be freestanding or stacked.
Remember that the tumble dryer produces heat
and should therefore not be located in a room that
is too small. If the room is very small, drying will
take longer due to the limited quantity of air.
CAUTION!
For proper ventilation, the machine should not
be installed behind a door.
WARNING!
The tumble dryer's toe kick ventilation must not
be blocked by a rug or the like.
NOTE!
If the unit must be installed behind a door should
be louvered. To improve ventilation, the door
where the tumble dryer is located should be left
open when the dryer is in use.
CAUTION!
Clothes dryer installation must be performed by
a qualified installer.
A. Freestanding
The tumble dryer can be positioned beside the
cleaning machine.
B. Stacked
The tumble dryer can be placed on top of a ASKO
cleaning machine. To stack the dryer, you need
the stacking attachments (foot cups and anti-tip
devices) that come with the machine: You will find
2 foot cups in a bag in the drum and 2 anti-tip
devices attached to the bottom left corner at the
back of the machine. Extension plates can be
ordered from your local retailer.
17
Customer Care Center
1-800-898-1879
www.askousa.com
Installation instructions
