What to do?
Cause
Problem/error
Laundry not
dried or drying
takes too long.
•
•
Clean the filters (see chapter
"CLEANING AND MAINTENANCE").
Filters are not clean.
•
Make sure there is adequate supply of
fresh air to the dryer; for example, open
the door and/or window.
•
Dryer is placed in a closed room;
room that is too cold; or room
that is too small and the air
overheats as a result.
•
Check if the temperature in the room
where the dryer is installed is too high
or too low.
•
•
If the load is still wet after completed
drying cycle, an appropriate drying
Laundry was not sufficiently
wrung or spun.
program should be run again (after
cleaning filters).
•
•
Use a suitable program or extra
functions.
Amount of laundry dried in the
appliance is too large or
insufficient.
•
Close the buttons or zippers on the
laundry before drying. Select a suitable
program.
•
Laundry (such as bedding) gets
tangled into large balls.
•
After the drying process, loosen the
laundry and select an additional drying
program (e.g. timed drying program).
Unevenly
dried laundry.
•
•
Make sure you have sorted the laundry
by type and thickness, whether you have
added a suitable amount of laundry to
Laundry of varying types and
thickness, and excessive amount
of laundry.
the drum, and whether you have
selected a suitable program.
A slight hitting
noise appears.
•
•
The noise will subside without any
intervention.
If the dryer is out of use for a
long period of time, the same
points of load-bearing elements
or components are under stress
for a long time, causing
temporary deformation.
The door
opens during
drying.
•
•
Reduce the amount of laundry.
Excessive load on the door (too
much laundry in the drum).
Table continued from last page
41
Errors – what to do?
