10
Install the door to the front and screw
the door.
Draining the condensate
The moisture from the laundry is extracted in the condenser unit and accumulated in the condensate
tank. Condensate tank has to be emptied regularly (see chapter "
Cleaning and maintenance
").
To simplified and avoid emptying and interruption of the drying cycle due to full condensate tank,
run the condensate discharge tube located at the back of the appliance directly into a drain (see
chapter "
Settings/ Condensed water
").
1
Remove the small short hose from the
attachment (A).
2
Connect the supplied drain hose to the
same attachment (A).
Run the condensate drain hose into a
drain. Tie the hose onto a tap (B) so
that it cannot slip during use.
The drain hose can also be fed into the
washbasin siphon (C) or directly into
the floor drain (D).
Then, the water is pumped directly into
a washbasin, a siphon, or a floor drain.
INFORMATION!
Do not pull the drain hose, and
make sure it is not under tension,
clamped, or bent.
19
Installation and connection
