You can choose whether the door is hung on the
right or the left.
Follow these instructions:
1. Remove the plinth.
2. Remove the hinge, two screws.
3. Lift the door up and remove it. Support the door
at the same time.
4. Remove both door pins (top and bottom). Fit
them on the other side of the machine. Refit
the hinge.
5. Loosen and remove the catch (lift up and pull
out) and the cover plate on the door and the
machine. Switch the catch and the cover plate.
1
2
6. Move the plastic plugs on the upper and lower
edges of the door. Use a flat-bladed
screwdriver to remove the plugs.
7. Refit the door by loosening the hinge screws
slightly, affixing the door and closing it.
Retighten the hinges. Replace the plinth.
25
Door hanging
Summary of Contents for T754C
Page 17: ...UPP UP OBEN 7 Reattach the plinth 17 Care and cleaning ...
Page 26: ...26 Your notes ...
Page 27: ...27 Your notes ...
