Asko DWC5926 XL, Operating Instructions Manual, Page: 9 / 28

Starting the dishwasher
Press and hold Start/Stop until the display shows “Program
started”. This indicates that the dishwasher is ready to start. Close
the door properly, or the dishwasher will not start.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last programme run.
Information on the front display.
The front display shows Show remaining time, Show temperature
and/or Show wash sequence. Select the information you want
displayed on the front display. See “Operating information” in
section Settings on page 10.
Show time
Once you have selected a programme, the display indicates how
long the programme took last time it was used. Once you have
started the dishwasher, the display indicates how much
programme time remains.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the
ambient temperature and other factors.
While the programme is running, the time counts down and the
remaining programme time is shown on the display. The
remaining time is shown, for example, as 1:15, which means the
programme will run for another 1 hour and 15 minutes.
NOTE!
During the first run of each programme, the remaining time
displayed can be slightly misleading, as the dishwasher is
estimating the time. When you run the programme a second
time, the dishwasher will calculate the remaining time based
on the previous duration of the programme.
Show temperature
The washing water’s current temperature is shown on the display.
Show dishwashing sequence
The current dishwashing sequence is shown on the display.
Stopping or changing a programme
A programme should only be interrupted if it is absolutely
necessary.
Open the door, press and hold Start/Stop for three seconds if
you want to interrupt the programme after you have started the
dishwasher. Refill the detergent if the door of the dispenser’s
detergent compartment has opened (this happens automatically
if an automatic dosing system is connected). Then select a new
programme, press Start/Stop and close the door.
WARNING!
Risk of burns if the dishwasher door opens while a programme
is in progress. Note that the inside of the dishwasher reaches
a high temperature, especially during the final rinse.
If the dishwasher is switched off using
the main power switch or during a
power cut
If the dishwashing programme was not finished, the interrupted
programme continues when power is restored.
NOTE!
During drying, the programme is interrupted if the power is cut
or the door is open for more than 2 minutes.
Once the programme has finished
Once the programme has finished, "END" appears on the display.
A buzzer also sounds at the end of the programme. See the
section Settings, which describes how to change this function.
The dishwasher switches off when the door is opened. If the door
does not open within 60 minutes, the dishwasher will switch off
automatically. Shut off the water tap if the dishwasher is not used
for a long time.
WARNING!
The inside of the dishwasher reaches high temperatures when
a programme is in progress. Be careful when opening the door.
Let the baskets cool before taking them out.
Do not touch the heating elements in the bottom of the
dishwasher, as they are very hot during and just after a
dishwashing programme has ended.
9