Asko DWC5926 XL, Operating Instructions Manual

Page: 11 / 28

You can change the following settings in the Function Menu:
Options Settings
You can choose the language used for the display. English/Svenska/Dansk/Norsk/
Suomi/Français/Deutsch/Italiano/
Español/Nederlands/
Русский
1. Language
The washing water’s highest temperature in the last run
programme is shown in the display.
2. Temp. in last program
Vent the automatic dosing system by activating Dispense
detergent and Dispense rinse aid.
Dispense detergent 3. Automatic dosing system
Dispense rinse aid
Activate Detergent if the dishwasher is connected to an
automatic dosing system.
Detergent: On/Off
Detergent will be added for 30 seconds during the main wash.
Activate Rinse aid if the dishwasher is connected to an
automatic dosing system.
Rinse aid: On/Off
Rinse aid will be added for 30 seconds during the final rinse.
Only select High if the dishwasher is connected to an
automatic dosing system.
Spray pressure: High/Normal
You can activate the child lock (button lock) to prevent
children from starting the dishwasher.
Child lock: On/Off 4. Child lock
To temporarily deactivate and activate the child lock, press
and hold the button above the symbol for five seconds. (The
child lock activates automatically again after two minutes.)
Temperatures can be displayed in °C (Celsius) or °F
(Fahrenheit).
Celsius/Fahrenheit 5. Temperature unit
Select what information should be shown on the front display
under the programme in progress. (If Off is selected on all
programmes, the remaining time will be shown.)
Show remaining time: On/Off 6. Operating information
Show temperature: On/Off
Show wash sequence: On/Off
The dishwasher uses a buzzer to indicate when a programme
is finished or when a fault has occurred.
Off/Low/Mid/High 7. Signal volume
This sound is used to confirm each button press. Off/Low/Mid/High 8. Button volume
For adjusting the contrast in the displays. LCD contrast: 1/2/3/4 9. LCD contrast
Settings for dispensing rinse aid. (Only active if Automatic
dosing system for rinse aid is set on Off.)
Rinse aid: 1/2/3/4/5/0 10. Rinse aid
Adjusting the water softener. Read off the appropriate setting
from the water hardness table below.
°dH
0-3
4-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40+
0-5
6-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71+
°fH °dH °fH
Water hardness: 0-9 11. Water hardness
High setting for the water softener in the event of problems
with white coatings on the dishes and in the dishwasher.
11