Asko DWC5926 XL, Operating Instructions Manual

Page: 8 / 28

NOTE!
Only use powder and liquid dishwasher detergent in the
dishwasher’s detergent compartment. Dishwasher tablets are
not recommended. Washing up liquid must not be used as the
foam that forms prevents the dishwasher from operating
effectively.
Commercial dishwasher detergent adapted for automatic
dosing systems should not be used in the dishwasher’s
detergent dispensing compartment.
Detergent with high enzyme content
If detergent with high enzyme content will be used, we
recommend a programme with a low temperature for the main
wash and a high temperature for the final rinse. Program A,
Program B and Program C can be designed according to the
business’s specific needs. Create a programme with prewash,
long main wash at a low temperature (40 °C) and final rinse at a
high temperature (60 °C or 70 °C). See “Create program” in
section Settings on page 10.
The main power switch
Press and hold the main power switch until the display lights up.
The message “Open to unlock” is shown on the display. Open
the door to activate the panel.
Programme selection
Press the Programme selector one or more times until the desired
programme appears on the display. (The dishwasher is
programmed with programmes for different purposes. Certain
programmes can be deactivated upon delivery. In section
Settings on page 10 the process for activating and deactivating
programmes is described. See Select programs.)
Quick Wash
Short programmes for lightly soiled/rinsed dishes such as glasses
and coffee cups.
Universal
Standard programme for normally soiled/scraped dishes. (Not
dried leftovers.)
Universal Plus
Efficient programme for very dirty dishes with slight dried
leftovers. (Not burnt-on food such as in gratin dishes.)
Intensive
Powerful programme for very dirty dishes with dried leftovers.
(Not burnt-on food such as in gratin dishes.) This programme
has maximum rinsing results, and take somewhat longer than
Universal Plus.
Wine Glasses
Gentle programme for fragile dishes such as fine glassware.
Beer Glasses
Programme specially adapted for robust beer glasses. No rinse
aid is dispensed during the final rinse. The final rinse is carried
out automatically in cold water if it is connected.
Plastic wash
Programme intended for washing plastic items that are
dishwasher safe. Porcelain and glass can also be washed.
Eco wash
This programme is intended for cleaning normally dirty dishes
and is the most effective programme in terms of combined energy
and water consumption. This results in a longer programme time.
This programme is also good for dried leftovers, but is not
intended for burnt-on food such as in gratin dishes.
Pots and Pans
Programme for very dirty dishes, such as pans, casserole dishes
and oven dishes. If these dishes do not completely fill the
dishwasher, you can add plates and the like.
Quick Wash Sani
1)
Short programme for cleaning and disinfecting dishes. The final
rinse has a temperature over 85 °C in 3 minutes.
Universal Sani
1)
Programme for the efficient cleaning and disinfecting of dishes.
The final rinse has a temperature over 85 °C in 3 minutes.
Rinse
Programme for rinsing dishes.
Drain
Programme for pumping out water, for example in the event of
programmes being interrupted.
Program A / Program B / Program C
Programmes which can be adapted for specific needs. See
“Create program” in section Settings on page 10.
Select an option
To make a selection, press one of the option buttons. The field
by the button lights up when the option is activated. The available
options depend on the selected programme.
Drying
The option Drying activates a drying period of 15 minutes and
can be selected for programmes Quick Wash, Universal,
Universal Plus, Intensive, Wine Glasses, Beer Glasses, Plastic
wash and Pots and Pans. The energy consumption is then slightly
increased. When you start a programme, the option selected is
saved for the next time you run the same programme.
Delayed start
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press several
times or hold the button to set the desired number of hours.
Delayed start including programme time is shown on the
display.
2 Press Start/Stop and the dishwasher counts down 1 hour at
a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the
programme.
1)
High setting for the water softener if the programme is used frequently. See "Water hardness" in section Settings.
8