Asko DW20.1, Service Manual

Page: 22 / 40

22
S E T T I N G S S E T T I N G S
S E T T I N G S S E T T I N G S
S E T T I N G S
Water hardness setting
Activation of setting menu:
1. Turn off the main switch (1/0)
2. Wait for at least 5 seconds
3. Keep the Start button (S2) depressed
4. Turn on the main switch (1/0)
5. Release the Start button (S2)
6. Select desired water hardness with the
Programme button (S1)
Setting: Water hardness [°dH]
Display shows: 0 0-5 (incl. machines
without water softener)
Display shows: 1 6-8
Display shows: 2 9-11
Display shows: 3 12-14
Display shows: 4 15-19
Display shows: 5 20-24
Display shows: 6 25-29
Display shows: 7 30-39
Display shows: 8 40-49
Display shows: 9 50+
7. Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Super rinse (only machines with Express; S7)
Adds two rinses at all programs, except Auto,
Quick and Rinse & Hold
Activation of setting menu:
1. Turn off the main switch (1/0)
2. Wait for at least 5 seconds
3. Keep the Express button depressed (S7)
4. Turn on the main switch (1/0)
4. Release the Express button (S7)
5. Select desired status with the Programme
button (S1)
Display shows 0: Super rinse deactivated
Display shows 1: Super rinse activated
6. Confirm your choice by pressing Start
(S2). The programme returns to the main
menu.
Child lock
Activation of setting menu:
1. Turn off the main switch (1/0)
2. Wait for at least 5 seconds
3. Keep the Temperature and Drying selection
buttons depressed (S4 & S6)
4. Turn on the main switch (1/0)
5. Release the Temperature and Drying
selection buttons (S4 & S6)
6. Select status with the Programme button (S1)
Display shows 0, key extinguished: Child
lock deactivated
Display shows 1, key lit: Child lock activated
7. Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
To unlock the child lock temporarily, the Tempera-
ture (S4) and Drying selection (S6) buttons must
be pressed in simultaneously. The machine can
now be operated normally for three minutes.
1. Turn off the main switch (1/0)
2. Wait for at least 5 seconds
3. Keep the Programme and Sart buttons
depressed (S1 & S2)
4. Turn on the main switch (1/0)
5. Release the Programme and Start buttons
(S1 & S2)
6. Press Start (S2) three times within five
seconds
Total reset
To reset the machine to its basic settings.
1. Turn off the main switch (1/0)
2. Wait for at least 5 seconds
3. Keep the Programme button depressed (S1)
4. Turn on the main switch (1/0)
5. Release the Programme button (S1).
The machine now resets various settings,
although not the water hardness and intake
volume, and senses the presence of the turbidity
and pressure sensors and the spray arm divider.
The machine then reverts automatically to the
main menu.