On/Left-on mode
Press and hold the On/Left-on mode button until the display lights
up.
Program selection
Press the Program selector one or more times until the desired
program symbol appears on the display.
Sani A
This program is ideal to use when hygiene demands are set high.
The temperature of the main wash is 60 °C °C. The final rinse is
85 °C °C for 6 minutes.
Sani B
Choose Sani B if you want a quicker program that still fulfils hy-
giene demands. The temperature of the main wash is 50 °C °C.
The final rinse is 85 °C °C for 3 minutes.
Heavy wash
Program for very dirty dishes, such as pans, casserole dishes
and oven dishes. If these dishes do not completely fill the dish-
washer, you can add plates and the like.
Normal program
Use to wash normally soiled load, such as plates, serving dishes,
cups, glasses and so on.
Daily wash
A program suitable for day-to-day dishwashing. This program
can also clean dried leftovers, but is not intended for burnt food,
such as on oven dishes.
Quick wash
This program is used for glasses and porcelain that is slightly
dirty, such as coffee cups.
Delicate wash
If the dishes are not very dirty, you can select Delicate wash. This
program is intended for glasses and porcelain that have just been
used and as such do not require such a powerful program.
This program can be used for delicate dishes. See also the sec-
tion Fragile dishes in Chapter Loading the dishwasher.
Eco wash
Use when you want to save water. For normally dirty dishes.
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher to become
fully loaded.
Start the dishwasher
Press and hold Start/Stop until the display shows
(the door
open symbol). This indicates that the dishwasher is ready to start.
Close the door properly, otherwise the dishwasher will not start.
The display flashes three times with the remaining time to indicate
that the program has started.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last program run.
Time remaining
Once you have selected a program, the display indicates how
long the program took the last time it was used. Once you have
started the dishwasher, the display indicates how much program
time remains. The remaining time is updated after the water for
the final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the ambi-
ent temperature and other factors.
While the program is running, the time counts down and the re-
maining program time is shown on the display. The remaining
time is shown, for example, as 1:15, which means the program
will run for another 1 hour and 15 minutes.
NOTE!
During the first run of each program, the remaining time dis-
played can be slightly misleading, as the dishwasher is estimat-
ing the time. When you run the program a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the program.
Stopping or changing a program
If you want to change program after starting the dishwasher,
open the door then press and hold Start/Stop for three seconds.
Add more detergent if the lid of the detergent dispenser has
opened. Then choose a new program, press Start/Stop and close
the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add the
dishes, close the door and the dishwasher continues the program.
If the dishwasher is turned off using
the On/Left-on mode button or due
to a power failure
If the dishwashing program was not finished, the interrupted
program continues when power is restored.
NOTE!
During drying, the program is interrupted if the power is cut or
the door is open for more than 2 minutes.
8
