Action
Possible causes
Problem
Fully load the dishwasher.
The dishwasher is not fully loaded.
The dishes are not dry enough.
Top up with rinse aid or increase the rinse
aid dosage. See the sections Before washing
for the first time and Settings.
Rinse aid needs topping up or dosage is set
too low.
Deactivate the TAB (3-in-1/ All-in-one deter-
gent) setting and top up the salt and rinse
aid.
3-in-1/All-in-one detergent is used and the
TAB (3-in-1/All-in-one detergent) setting is
activated.
Open the door a little once the program has
finished.
Check that the baskets are correctly posi-
tioned horizontally.
The baskets are not correctly positioned.
Cannot close door.
Check that the dishes are not blocking the
baskets from sliding properly into place.
Wait a moment then try again.
You have pressed the touch buttons too soon
after opening the door.
The touch buttons do not react when
pressed.
Clean with a dry or slightly damp cloth.
Dirt on the touch buttons.
Open the door until the display lights up. Al-
ternatively, close the door and wait 30 sec-
onds. Then open the door again.
If this symbol appears on the display
the door is not open enough.
17