Asko D5896 XXL, Operating Instructions Manual

Page: 15 / 28

Troubleshooting
Action Type of fault on the
display
Front display
Clear the drainage pump. See the section Care and cleaning. If the problem persists, call
the service department.
Overfilling 1 F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists,
call the service department.
Water outlet fault F11
Check whether dishwasher inlet hose is connected to a pressure limiting valve (some
pressure limiting valves may restrict the supply of water to the dishwasher).
Water inlet fault F12
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked.
If the problem persists, call the service department.
Turn off the water tap and call the service division. Inlet valve leakage F40
Check plugs/fuses. If the problem persists, cut the power using the building’s main power
switch and call the service department.
Temp. stop fault 3 F41
Call the service division. Thermistor fault 1 F42
Call the service division. Pressure sensor fault
1 F43
Call the service division. Temp. stop fault 1 F49
Check plugs/fuses. If the problem persists, cut the power using the building’s main power
switch and call the service department.
Temp. stop fault 4 F51
Turn off the water tap and call the service division. Overfilling 2 F54
(UIC is an abbreviation of "User Interface Control"). Call the service department. Communication fault
UIC
F58
(UIC is an abbreviation of "User Interface Control"). Call the service department. Version UIC fault F59
Call the service division. Unknown fault F60
Press any button to clear the error message.
Action Possible causes Problem
Remove the arms and clean them. The spray arms do not rotate. The dishes are not clean.
Check that the dishes are not blocking the
spray arms.
Avoid large packages. Old detergent. Detergent is a perishable
product.
Dose according to water hardness. Far too
much or far too little detergent results in
poorer dishwashing results.
Incorrect detergent dosage.
Select a more powerful program. Dishwashing program too weak.
Do not cover porcelain with large bowls or
the like. Avoid placing very tall glasses in the
corners of the baskets.
Dishes loaded incorrectly.
Place dishes to sit steady. Glasses and cups have toppled over during
the program.
Screw the filter firmly into place. See the
section Care and cleaning.
The filter is not correctly fitted.
15