Action
Possible causes
Problem
Check that the dishes are placed securely.
Spin the spray arms to make sure they can
rotate.
The dishes are not correctly placed or the
spray arms are not rotating.
Rattling sound when dishwashing.
Press and hold Start/Stop until the display
shows
(the door open symbol). This
indicates that the dishwasher is ready to start.
The Start/Stop start button has been pressed
for too short a time.
The dishwasher does not start.
Check.
The door is not properly closed.
Check.
A fuse/circuit breaker has been tripped.
Check.
The plug is not plugged into the power outlet.
Check.
The water supply valve is turned off.
Check.
Overflow/leaks.
Turn off the water supply valve. Pull out the
plug and call the Customer Care Center.
A whirring sound (the drain pump) is heard
from the dishwasher and does not stop when
the power is cut with the On/Left-on mode
button.
Press and hold Start/Stop for three seconds
if you want to cancel the Delayed start option.
Check that the Delayed start option has not
been selected.
None. Next time the program is run, the cor-
rected time will be displayed.
The program is taking longer than estimated.
1 minute appears on the display.
Loosen the drain hose from where it termi-
nates. Check that no debris has clogged the
hose. Is the cone-shaped part of the drain
boot cut to the maximum size of the fitting
where it attaches?
Blocked drain hose.
Water remains in the dishwasher above the
filters.
Check that the hose is free from kinks and
sharp bends.
Kink in drain hose.
Clean the coarse and fine filters.
The filters are blocked.
Clean the drain pump. See the section Care
Debris in the drain pump.
Clean with dish brush and low foaming
cleaner.
Dirt around the seals and in corners.
Bad odor in dishwasher.
Run a program with a higher temperature
about once a month.
Low temperature programs have been select-
ed for a prolonged period.
Activate the Long dry option.
Drying power too low.
The dishes are not dry enough.
Fully load the dishwasher.
The dishwasher is not fully loaded.
Top up with rinse add or increase the rinse
aid dosage. See the sections Before washing
for the first time and Settings.
Rinse aid needs topping up or dosage is set
too low.
Open the door a little once the program has
finished.
Customer Care Center 1-800-898-1879
www.askona.com
16
