manualshive.com logo in svg

Asko D5233, Operating Instructions Manual, Page: 22 / 48

Share
Download
Asko D5233 Operating Instructions Manual Download Page 22

Customer Care Center

1-800-898-1879

www.askousa.com

Setting a signal

If you want the machine to signal when the wash is complete, you can program it to do this. 

The machine is set without a signal by default.

    

 

1.  

Switch off the dishwasher at the main switch.

   

. 

Hold in the Delayed start button at the same time as you press the    

 

 

 

main switch. The button flashes. Release the button.

PROG    

 

PROG    

 

  . 

Press the Program button – when the Auto wash symbol lights, the    

 

 

 

signal is activated. 

START

STOP

 

. 

Press the Start/Stop button and the setting will be stored until next time  

 

 

 

you want to make a change.

   

 

or Reset

      

1.  

Switch off the dishwasher with the main switch.

    

 

. 

Hold in the Delayed start button at the same time as you press the    

 

 

 

main switch. The button flashes. Release the button.

PROG    

 

PROG    

 

  . 

Press the Program button – when the Auto wash symbol goes out, the  

 

 

 

signal is deactivated. 

START

STOP

 

. 

Press the Start/Stop button and the setting will be stored until next time  

 

 

 

you want to make a change.

Summary of Contents for D5233

















































Reviews:

No comments