EN 20
Removing the oven door
(depending on model)
1. Fully open the door (as far as it will go).
2. A. Rotate the stoppers all the way back.
B. Rotate the stoppers back by 90°.
C. Slightly lift the door latches and pull them towards you.
3. Slowly close the door until the stoppers are aligned with the hinge beds. At the angle of
15° (relative to the closed door position), slightly lift the door and pull it out from both hinge
beds on the appliance.
A
B
C
To replace the door repeat these actions in reverse. If the door does not open or close properly,
make sure the hinges are positioned correctly in their slots.
Always ensure that the catches fit properly in their slots. Never allow the hinge
fitting to spring out because the central springs are very strong and can cause
injury.
CLEANING
