background image

1.

 

Product Spec. 

Chip Set 

Atheros AR9271 

Operation Voltage 

3.3V 

Network Standards 

IEEE802.11b, IEEE802.11g and IEEE802.11n 

Modulation Techniques 

BPSK, QPSK, CCK, DBPSK, DQPSK, 16QAM, 64QAM 

Modulation Technology 

OFDM, CCK, DSSS, MIMO(1T1R) 

Data Rate 

802.11b: 11, 5.5, 2, 1 Mbps 
802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 
802.11n: 
HT20: 65, 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps(MCS7-0) 
HT40: 135, 121.5, 108, 81, 54, 40.5, 27, 13.5Mbps(MCS7-0) 

Network Architectures 

Infrastructure and Ad Hoc 

Operating Frequencies 

2.412~2.4

6

2 GHz 

Antenna Type 

Antenna 1: RF chain 0 for transmit and receive 
Antenna 2: RF chain 1 diversity antenna for receive 

RF output power 

11b: 16dBm 
11g: 16dBm , 15dBm@54M 
11n HT20: 16dBm, 13dBm@MCS6, 12dBm@MCS7 
    HT40:16dBm, 15dBm@MCS5, 11dBm@MCS6, 10dBm@MCS7 

Receiver sensitivity 
(PER<10%) 

802.11b: -82dBm@11Mbps and PER<8% 
802.11g: -65dBm@54Mbps and PER<10% 
802.11n: HT20-654dBm, HT40:-62dBm 

Power Consumption 

Tx: 1115mW continuous transmitter 11b @2.4GHz;(1M, 18dBm, 1TX, 
IEEE802.11b) 
Tx: 1181mW continuous transmitter 11g @2.4GHz;(6M, 18dBm, 1TX, 
IEEE802.11g) 
Tx: 1184mW continuous transmitter 11n @2.4GHz;(MCS0, 20MHz, 
IEEE802.11n) 
Tx: 1207mW continuous transmitter 11nb @2.4GHz;( MCS0, 40MHz, 
1TX, IEEE802.11n) 
Rx: 376mW continuous transmitter 11g @2.4GHz;(1M, IEEE802.11b) 
Rx: 379mW continuous transmitter 11g @2.4GHz;(6M, IEEE802.11g) 
Rx: 376mW continuous transmitter 11n @2.4GHz;(MCS0, 20MHz, 
IEEE802.11n) 
Tx: 475mW continuous transmitter 11nb @2.4GHz;( MCS0, 40MHz, 
1TX, IEEE802.11n) 

Temperatures(AMBIENT) Operation: 

0~60

, Storage:-20~70

 

Humidity(non-condensing) 0~95%RH 

Antenna 

Ant1: PCB Antenna/ Gain:2.86 
Ant2: PCB Antenna/ Gain:2.74 
Ant3: PCB Antenna/ Gain:2.19 
Ant4: PCB Antenna/ Gain:2.50 
Ant5: PCB Antenna/ Gain:0.77 

 

Summary of Contents for WLU6120-D01








Reviews: