63
Steps to set up Routing:
1.
From the navigation panel, go to
Advanced
>
Network
>
Routing.
2.
Enable 1:1 NAT
: Check [
Yes
] to enable this function, check [
No
] to disable this
function.
3.
Name
: A brief description for application.
4.
Public IP
: IP address from Charter supplied public IP subnets.
5.
Local IP
: Key in the client’s LAN IP address, not limited to the subnet
for the directly
connected LAN interface
6.
Click
On/Off
to enable/disable the rule.
7.
Click
[
+
]
to add this item to the 1:1 NAT List.
8.
Click
Apply
.
NOTE
: This module only works only when WAN port is in static mode!
Summary of Contents for SAX1V1K
Page 1: ...802 11ax Wave 2 Router User Guide 2020 5 21 ...
Page 45: ...44 ...
Page 59: ...58 Steps to set up IPv6 ...
Page 88: ...87 ...
