56
2.
Frequency
: Select the frequency band to configure professional settings.
3.
WiFi Network Name
: A name whose length is less than 32 characters is used to
identify a wireless network.
4.
TX STBC
: Enables or disables the Space Time Coding Block (STBC) feature, as
described in 802.11 specification, in transmitting (TX) direction.
5.
RX STBC
: Enables or disables the Space Time Coding Block (STBC) feature, as
described in 802.11 specification, in receiving (RX) direction.
6.
Set AP Isolated
: Prevent wireless devices from communicating with each other via
WiFi Router. This feature is useful if many guests frequently join or leave your
network. Select [
Yes]
to enable this feature or select [
No]
to disable.
7.
Multicast Rate (Mbps)
: Setting transmission rate for multicast.
8.
Short Guard Interval
: Defines the length of time that the WiFi Router spends for
CRC (Cyclic Redundancy Check). CRC is a method of detecting errors during data
transmission. Select
Enable
for a busy wireless network with high network traffic.
9.
DTIM Interval
: DTIM (Delivery Traffic Indication Message) Interval or Data Beacon
Rate is the time interval before a signal is sent to a wireless device in sleep mode
indicating that a data packet is awaiting delivery. The default value is three
milliseconds.
10.
Current DTIM Interval
：
：
：
：
The article represent a current state.
11.
WMM
:
Enables or disables WMM capabilities in the driver. The WMM capabilities
perform special processing for multimedia stream data including voice and video
data.
Summary of Contents for SAX1V1K
Page 1: ...802 11ax Wave 2 Router User Guide 2020 5 21 ...
Page 45: ...44 ...
Page 59: ...58 Steps to set up IPv6 ...
Page 88: ...87 ...
