USER MANUEL
LDB 2
DESKTOP READER
ASK R&D
Réf. : RD-MU-03036-10
Rév.: 1.0
8 / 10
Copyright ASK SA - 2003
3 READER SETUP
3.1 INSTALLING A NEW SAM IN READER
In most applications, one SAM (Security Application Module) or more is required.
These components are provided separately, so to set a SAM, the plastic case
should be opened.
For opening, flip over the plastic case. You have to put a blade in the rear slot and
lift the bottom of the case in order to set free a central ergot. Then the bottom of the
box should be removed by sliding in the front side direction.
The stacked board will appear as in Figure 7, the first SAM should be installed on
coupler board GEN 32X (Figure 1) and next SAMs should be installed on DC
conversion board GEN 351 (Figure 5).
Caution
: In a first time, µSIM SAMs must be gently inserted in the open door
socket (Figure 8), then in a second time the door should be locked.
Figure 8 : SAM in open door
SAM
