ASK R&D
Réf. : RD-ST-03022-10
Rév.: 1.0
2 / 10
ASK
5 traverse des Brucs. Les Bouillides
R&D001-Form1
06560 VALBONNE SOPHIA ANTIPOLIS
Tel : 04 97 21 40 00
Fax : 04 92 38 93 21
FCC Compliance Statements
This equipment has been tested and found to comply with the radiated limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a
reasonable protection against harmful interferences in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
the correct interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions. (1) This device may not cause harmful interferences. And (2) this device must
accept any interference received, including interference that may cause undesired operation.
The ASK
LDB 2
reader was submitted and a grand of authorization received from the FCC as
device under the intentional radiator requirements of Part 15, Subpart C.
The party that incorporates this device into their product is responsible for verification of the
emissions produced by the final product and must adhere to the limits specified in the Code of
Federal Regulation 47, Part 15, subpart B.
Compliance accessories
: The accessories associated with this equipment are: shielded
serial cable with ferrite tube and linear sector adaptor (12V DC 500mA). These accessories
are required to be used in order to ensure compliance with the FFC rules.
Caution
: Any changes or modification not approved by ASK could void user’s authority to
operate the equipment. Switching power mode adaptors are prohibited.
CE Compliance statement
The ASK
LDB 2
reader is in conformity with European requirements, this product has been
assessed to the following standard:
EN 300 330
EN 301 489-3
EN 50121-4
EN 60950-1
