USER MANUEL
LDB 2
DESKTOP READER
ASK R&D
Réf. : RD-MU-03036-10
Rév.: 1.0
10 / 10
Copyright ASK SA - 2003
4 HOW TO USE THE READER
4.1 CONTACTLESS OPERATIONS
All the top surface of
LDB 2
reader is active. Contactless smart card must be laid flat on the
reader, yellow LED is turned on when operation is correct.
4.2 CONTACT OPERATIONS
The smart card should be inserted, chip on top, in the front slot of the
LDB 2
reader (card
contact faces triangle on reader front side).
The card should be pushed until a resistance appears (reader’s contacts fall down on card’s
contact).
4.3 SOFTWARE
The LDB is delivered by default with an application software called CSC which supports the
ASK cards and C.ticket
families.
The external LEDs of the reader can be controlled by customer applicative software using
CSC software commands.
In the same way, the GEN360 contact card reader and the extra SAM modules supported by
the GEN351 board have to be managed by the host application via CSC protocol.
4.4 CLEANING
No adjustments on the reader are required. To clean, simply wipe with a wet cloth and plastic
cleaner, abrasive products are prohibited.
