39
Adjusting screen size
With E1655, the size of the screen can be re-set to the value the
user desires.
1.Press F. Menu on the remote control to display the on-screen menu.
Press to select the screen. Then press or press Select.
2.Press ▲▼ to select the desired item, and then press Select.
Normal
This function will make the width-height proportion of the projected
image consistent with the input signals.
Wide
This item provides normal video images with a width-height
proportion 16:9.
Custom
This item can help users manually adjust the proportion and
position of the screen.
When this item is selected, press ►.
The indication of self-definition
will appear on the screen. Y
ou can press ▲▼ to select the items
to be adjusted.
Horizontal/Vertical: To adjust the horizontal/vertical proportion
of the screen.
H&V: When this item is enabled, the width-height proportion will be
locked. The vertical proportion is displayed in grey, meaning
“disabled”.
You can adjust thehorizontal proportion, and then
modify the proportion of the screen on the basis of the width-height
proportion.
Honrizontal/Vertical Position:
To adjust the horizontal/vertical
position of the screen.
Common: Use this item to save input adjusted proportion. When you press Select
at this item, a dialog box will pop up for confirmation. To save the proportion, press
Select at Yes. If you select self-definition, the system will use the saved proportion.
Reset: This item allows you to re-set the adjusted values. In the initial state,
press Select, and a dialog box will pop up for confirmation. To re-set the parameters,
press Select at Yes.
√
Note:
●If no signal is detected, the system will be
automatically set as normal state. At the
time, the related dialog box disappears.
●The horizontal/vertical proportion and
of horizontal/vertical position should be
adjusted according to the input signal.
Screen Menu
AV Input
▲ ▼
▼
Keystone
This item is use to save the data when AC power is interrupted, or the project image is re-set.
You can press
▲ ▼
to switch over between the items below.
Save: When the power line is disconnected, the state of keystone correction can be retained.
Initial state: When the power line is disconnected, the state of keystone correction is initialized.
You can also press
▲▼
to correct keystone distortion. At the time, the keystone correction
menu will appear on the screen.
