44
01 20
Power management
To preserve energy and retain the service life of the lamp, you can use this function to turn off the
lamp for the time when E1655 is not used.
Options are:
Ready: When the lamp is cooled, the power indicator turns green and flashes. When the system is
in this state, you can either to re-connect to signa ls or press any key on-top control panel of E1655 or
on the remote control to make the lamp illuminated again.
Shut down: When the lamp is cool enough, the power will be turned off.
Off : Function of Pow er management
r
is disabled.
Timer: If no signal is input for over 30 seconds and no key is pressed during that time, the characters
“no signal ” will appear on the timer. Then the system counts down the time till the lamp is turned off.
You can press
▲▼
to set the timer (1-30 minutes)
√
Note:
The factory default for standby time: 5 minutes.
Time left before the
lamp is turned off.
Power management
No signal
Advanced Setting
