Ashton EDP450, Operating Manual

Page: 9 / 20

Press the [pan] button to enter menu. If menu is
selected, the corresponding menu indicator will be lit up.
In this menu, the 3
-
digit LED will show the pan of current
pad, which can be selected by pad hitting. The button
[+] / [-] can be used to change the pan(-8~+8) of
the current pad.
voice voice
VALUE
Set pad pan
8
Operation
8
Press [save] button to enter the kit save menu.The button
can be used to select a user kit (46-50,
loop) current kit setting. During kit selecting the user kit
number will keep flashing.
Press [ save ] button again, the current kit setting will be
saved to the selected kit. The machine will quit to the kit
menu and select this user kit as the current one, if all the
data has been saved successfully.
If saving is failed due to error, an Err will appear on the
LED.
VALUE [+] / [ ]
-
' '
NOTE:
The unsaved kit setting will be lost after kit changing.
Save Kit
Set pad midi note
Press[note]button to enter voice menu,If voice menu is
selected, the corresponding menu indicator will be lit up.
In this menu, the 3-digit LED will show the midi note of
current pad, which can be selected by pad hitting. The
button VALUE [+]/[-] can be used to change the midi note
(n00-n99, loop) of the current pad.
9
Operation
Set Pad MIDI note
Press [note] button to enter voice menu,If voice menu is
selected, the corresponding menu indicator will be lit up.
In this menu, the 3-digit LED will show the midi note of
current pad, which can be selected by pad hitting. The
button VALUE [+] / [-] can be used to change the MIDI note
(N00-N9, loop) of the current pad.
Save Kit
Press [save] button to enter the kit save menu.The button
VALUE [+] / [-] can be used to select a user kit (46-50,
loop) current kit setting. During kit selecting the user kit
number will keep flashing.
Press [ save ] button again, the current kit setting will be saved to
the selected kit. The machine will quit to the kit menu and select
this user kit as the current one, if all the data has been saved
successfully.
If saving is failed due to error, an ‘Err’ will appear on the
LED.
NOTE: The unsaved kit setting will be lost after kit changing.
OPERATION
9