Locate the drive band around the large
flyer whorl & small groove in the wheel.
This gives a flyer to wheel ratio of 5.5:1.
For a higher flyer speed, locate the drive
band on the small flyer whorl & large
groove in the wheel. This gives a flyer to
wheel ratio of 7.25:1.
NOTE. When not using your Kiwi 2
Spinning Wheel, please loosen the drive
belt to avoid it stretching.
Tie the 2 ends of the tape together, loop
it through the threading hook and hang it
on the tension knob.
Tap the lazy kate pins into the base and
locate the bobbins on them for storage
and plying
To make spinning easier apply a drop of
Ashford Spinning Wheel Oil to the flyer,
bobbin and conrod bearings.
2
3
4
1
5
6
Happy Spinning!
Summary of Contents for KIWI 2 SPINNING WHEEL
Page 2: ...REAL SCALE HARDWARE...
