16
There are 5 warp sticks included with your Jack Loom.
FRONT ROLLER
To attach a warp stick to the front roller, thread 1 Texsolv cord
through the first hole in the warp stick and back through the
second to end hole in the cord.
BACK ROLLER
Thread 1 Texsolv cord through the first hole in the warp
stick and back through the 8th hole leaving approx. 10cm of
Texsolv cord.
Then take the long end of the cord through the small hole in
the warp roller and out the large hole. Then push a texsolv peg
through the cord. The peg pulls down flat into the large hole.
Use the third warp stick for your end warp stick (refer to warp
instructions) and attach to the end of the Texsolv cord with a
Texsolv peg through the 6th hole.
Then take the long end of the cord through the small hole in
the warp roller and out the large hole. Then push a Texsolv peg
through the cord. The peg pulls down flat into the large hole.
Repeat for all holes.
Repeat for all holes.
Warping
For warping instructions please refer to our Jack Loom
Warping video on our website www.ashford.co.nz
Summary of Contents for Jack Loom
Page 5: ...5 PARTS...
