ASG, Division of Jergens, Inc.
15700
S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | www.asg-jergens.com
Page 21 of 23
Software (Continued)
Real Time
Result
Pass/Fail
DTT Series Digital Torque Testers
User Manual
Shows the last transmission from the DTT and includes the torque reading, the direction the reading was taken, the mode of
operation and the unit of measurement.
• Sample
: Display of the statistical analysis and number of readings in memory used for
calculations
• Max:
Shows the highest value in the table
• Min:
Shows the smallest value in the table
• Mean:
Values on average
• SD:
Values of the standard deviation
• COV:
Coefficient of variation
• PASS:
Shows number of torque readings that meet the conditions set in Pass/Fail.
Displays both the number and a percentage
• FAIL:
Show number of torque readings that fail the conditions set in Pass/Fail. Displays
both the number and a percentage
• In this example, ‘
PASS-FAIL
’ was not enabled
• Upper Limit
: The highest limit that is still considered acceptable
• Lower Limit:
The lowest limit that is still considered acceptable
• When the data does not meet set conditions of upper limit or lower limit, the character
will turn to red
• In this example, ‘
PASS-FAIL
’ was not enabled
