4
5
6A
6B
USING THE X-RAY STAND
- Cont’d
4. Ref. Figure 6A:
Push the X-Ray clamp
locking lever (K) down to open the X-Ray
clamp (H).
5. Ref. Figures 6B, 6C, and 6D:
Carefully
place the X-Ray unit between the X-Ray
clamp jaws. Pull the locking lever up to
close and lock the clamp onto the unit.
IMPORTANT:
Ensure that the X-Ray
Adapter is installed on the X-Ray unit handle
before clamping the unit into the stand.
6. Ref. Figure 6B:
If there is too much, or
too little, tension on the X-Ray clamp jaws
to close firmly around the X-Ray unit
handle, turn the clamp adjustment knob (L)
clockwise to increase jaw tension or
counterclockwise to loosen jaw tension.
7.
To fold up the ARU-01BS X-Ray Stand,
loosen the upper tube locking lever (G)
and slide the upper tube (B) down into the
bottom tube. Firmly close the locking lever.
Unscrew the clamp knob (I) to sufficiently
loosen and pull the X-Ray clamp (H)
assembly away from the square bracket.
Fold the assembly against the stand and
retighten the clamp knob. Open the bottom
tube locking lever (D), fold the base legs
against the bottom tube (A), and firmly
close the locking lever.
6C
6D
H
K
L
H
I
J
K
H
L
H
L
K
