3
1B
1C
2A
2C
2B
3A
3B
INSTALLING THE X-RAY ADAPTER
1. Mount the X-Ray Adapter onto the bottom
side of the X-Ray Unit handle as shown in
Figure 4A.
IMPORTANT:
Ensure that the
raised edge of the Adapter is seated
against the rear edge of the handle as
shown in Figure 4B.
4A
Adapter
USING THE X-RAY STAND
1.
Set up the ARU-01BS X-Ray Stand on a
stable, horizontal surface.
2. Ref. Figure 2B:
Loosen the upper tube
locking lever (G) and adjust the upper
sliding tube (B) to the appropriate height
for the x-ray procedure. Firmly close the
locking lever. (Height Adjusts from 36-in.
min., to 60-in. max.)
Note:
To make height adjustments easier,
we recommend that adjustments be made
without an X-Ray unit mounted in the stand.
3. Ref. Figure 5:
The X-Ray clamp (H) can
be rotated to allow precise positioning of
the X-Ray unit. Unscrew the clamp knob
(I) slightly to loosen clamp assembly.
Press in the rotation locking lever (J) and
rotate the X-Ray clamp to the desired
angle. Re- lease the locking lever and
firmly re-tighten the clamp knob. Note:
This adjustment can be made with an X-
Ray Unit mounted.
F
G
A
B
F
G
H
I
C
D
E
H
I
E
C
F
4B
