2
1. Ref. Figures 1A Thru 1C:
Open the
bottom tube collar locking lever (D) and
unfold the base legs (E) until the bottom
collar (C) touches the frame stop. Close
the locking lever firmly. NOTE: When
unfolding base legs, refer to setup
instruction label on bottom side of legs.
Caution:
When unfolding the base, keep
hands and fingers clear of moving parts.
2. Ref. Figures 2A & 2B:
Loosen the upper
tube collar locking lever (G) and raise the
upper sliding tube (B) to the desired
height. Firmly close the locking lever.
Note:
The upper locking lever should be
locked flush against the tube collar to
prevent slippage or stand collapse. Ref.
Figure 2C.
3. Ref. Figures 3A & 3B:
Unscrew the clamp
knob (I) sufficiently to loosen X-Ray clamp
assembly (H). Raise the X-Ray clamp (H)
and push assembly in toward the stand,
A
B
C
D
E
F
G
H
J
L
K
M
I
PARTS LIST & ASSEMBLY
Part Ref.
Part Description
A . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bottom Tube
B . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Upper Tube
C . . . . . . . . . . . . . . . . . . . . . .Bottom Tube Collar
D . . . . . . . . . . . . . . . . . . . .Bottom Locking Lever
E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Base
F . . . . . . . . . . . . . . . . . . . . . . .Upper Tube Collar
G . . . . . . . . . . . . . . . . . . . . .Upper Locking Lever
H . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-Ray Clamp
I . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Clamp Knob
J . . . . . . . . . . . . . . . . . . .Rotation Locking Lever
K . . . . . . . . . . . . . . .X-Ray Clamp Locking Lever
L . . . . . . . . . . . .X-Ray Clamp Adjustment Knob
M . . . . . . . . .X-Ray Adapter
(Aseptico PN: 461361)
1A
aligning it with the square bracket. Note:
Avoid pinching hands or fingers between
the bracket and clamp assembly. Firmly
tighten the clamp knob (I), to lock the X-
Ray clamp assembly into position.
A
B
C
D
E
F
G
H
I
J
K
L
M
A
B
C
D
E
F
G
H
I
J
K
L
M
E
C
D
Setup
Label
Frame
Stop
