ASEM SR 85, Service Manual

Page: 39 / 125

3.2.4 The Self Test Mode
The self-test checks whether the printer has any problem. If the printer does not function properly, contact your dealer.
The self-test checks the following;
1. Make sure paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The self-test begins. (Fig-17,18)
3. The self-test prints the current printer status, which provides the control ROM version and the printer setting.
4. After printing the current printer status, self-test printing will print the following and pause
(The PAPER LED / The LCD light blinks).
5. Press the FEED button to continue printing. The printer prints a pattern using the built-in character set.
6. The self-test automatically ends and cuts the paper after printing the following.
** End Self-Test **
SELF TEST PRINTING.
PLEASE PRESS PAPER FEED BUTTON
Figure
17
Figure
18
SR 85 - Service Manual