ASEM SR 85, Service Manual

Page: 12 / 125

2.1 General Specification
Item Description Remark
Processor

RENESAS R5F5631ECDFB

Cache Memory Size : 8K Byte
Memory

SDRAM : 64Mbits

CPU ON CHIP FLASH ROM : 16Mbits

SERIAL FLASH MEMORY : 64Mbits
Display
 SR85
: LED
Interface Serial
(RS-232C)

Flow Control :
①
DTR / DSR (H/W Flow Control)
② XON / XOFF (S/W Flow Control)

Baud Rate : 2400 / 4800 / 9600 / 14400 / 19200 /
38400 / 57600 / 115200 bps

Receive Buffer : 4 Kbytes

Connector : DB25P Female/ DB9P Female/RJ45
(I/F PBA Side)
The Flow Control, Baud Rate,
Stop Bit and Parity
Are determined by DIP S/W
position.
Interface Parallel

Mode
① Forward Mode : Compatibility Mode
②
Reverse Mode : Nibble / Byte Mode

Connector : 36 Pin Centronics (Ribbon Type)
USB

Transfer Type : BULK

Speed : 12 Mbps (Full-Speed)

Power : Self-Powered
Ethernet

Network Interface : Static and Dynamic IP Address

Speed : 10/100 Mbps
Wireless LAN

RF Protocol : IEEE802.11b/g/n compatible

WIFI MODE : Infrastructure, Limited AP

Security Protocol : WPA, WPA2-PSK, WEP, Enterprise

Networking Protocol : TCP/IP (IPv4), DHCP, HTTP/HTTPS Client
and Server
Auto Cutter

Type : Guillotine

Cutting Method : 1 Point Partial Cutting / Full cutting
Power Consumption

Approx. 27W (Peak)
SR 85 - Service Manual