ASEM SR 85, Service Manual

Page: 123 / 125

4.5-1 Main Board Case Block
1. Remove the fou r screws(
①②
) and separate the BRKT-
Interface(
③
) from the BRKT PCB-Lower(
⑤
).
2. Remove the two screws(
④
) and separate the BRKT PCB-
Lower(
⑤
) from the BRKT PCB-Upper(
⑧
).
3. Remove the screw(
⑩
) to separate the Plate-Ground PRT(
⑪
).
When assemble, surely assemble the Plate-Ground PRT(
⑪
)
w ith the BRKT PCB-Upper(
⑧
).
4. Remove the f our screws(
⑥
)and separate the Main-
Board(
⑦
) from the BRKT PCB-Upper(
⑧
).
5. Pull the Power-Switch(
⑨
) out of the BRKT PCB-Upper(
⑧
).
W A R N I N G !
SR 85 - Service Manual