User manual for ASIN Aqua
15
Setting Water Parameters
Water parameters tell ASIN Aqua the properties of your pool’s
water . ASIN Aqua includes pre-set defaults based on:
y
Indoor or Outdoor pool .
y
Level of water hardness .
y
Average temperature of water .
Because each of these parameters has an effect on how ASIN Aqua
performs, you must enter the correct water parameters to
ensure ASIN Aqua operates optimally with your pool .
Set your water parameters when you install ASIN Aqua .
1.
From the home screen select
settings then PARAMETERS
and then POOL PARAMETERS
to reach the following screen .
2.
POOL . Using the check boxes
select your type of pool:
y
INDOOR
y
OUTDOOR
y
EXTREME CONDITIONS
WA R N I N G:
this parameters effect
on maximal hour disinfection dosage .
3.
AVERAGE WATER TEMPERATURE .
Select the average temperature
of the water in the pool
WA R N I N G:
this parameters effect
on maximal hour disinfection dosage .
4.
WATER HARDNESS . Input the level
of hardness of the water in the pool .
This is measured in dH (degrees
of hardness), 0 – 9 is soft, 9 – 21
is hard and 21+ is very hard .
Ensure the parameters you
set match your pool before
calibrating your ASIN Aqua .
