EN
16
Power Supply
Connection to the mains:
1.
Leave the mains switch in the off position.
2.
Connect the fi ltering device to the ASIN AQUA Oxygen switched socket
outlet (fi ltration power supply - max. 1.4 kW / 230 VAC).
3.
Connect the 230 V / 50 Hz mains cable to ASIN AQUA Oxygen (on the right
side). The mains socket outlet must be protected by a residual current
device (RCD).
4.
Change the mains switch over to the on position.
After Device has been switched on, the display will come on and the ASIN AQUA
Oxygen starting screen will appear.
Disconnection from the mains:
1.
Change the mains switch over to the off position.
2.
Disconnect the ASIN AQUA Oxygen mains cable from the 230 V / 50 Hz
socket outlet.
3.
Disconnect the fi ltering unit mains cable from ASIN AQUA Oxygen.
WARNING:
If Device is used in the manner diff erent from that specifi ed by the
manufacturer, protection provided by Device may get damaged.
Power supply
230 V / 50 Hz
Power consumption
24 VA
Power consumption (including fi lter pump)
1449 VA
Max. input power of connected pump
1,4 kW / 230 V AC
Fuse
T800 mA; T160 mA; T6,3 A
Over-voltage category
II
Ingress protection
IP30
Operating temperature
+5 až +40 °C
Weight
6,7 kg
Installation
wall mounted
Relay output contacts
230 V / 1,4 kW
Discharge of dosing pumps
10 and 60 ml/min / max. 1bar
Measured water pressure
max. 1 bar
(no underpressure required)
Dimensions
430 x 330 x 160 mm
RCD
Proudový
chránič
30 mA
Max 1,4 kW
230 v~
230 V / 50 Hz
Residual
current device,
30 mA
230 V / 50 Hz
Max. 1,4 kW
230 V~
Installation must be
protected by a residual
current device (RCD).
