AC36VHES-1, -3 / AC45VHES-1, -3 / AC54VHES-1, -3 Operations Manual....
22
5.2
ELECTRICAL INSTALLATION, cont.
FIGURE 5 INPUT AND OUTPUT CONNECTIONS
Prepare the power cables by removing approximately 6” of the outer cable insulation (in the case
of SO type portable cables). Strip the insulation back exposing 1” of the bare conductor for all
input, output, and grounding conductors. Insert the prepared cables and strain relief assemblies
into the prepared holes in the cable access cover. Insert the terminated wire ends (use of ferrules
is recommended) into the appropriate input/output terminal block and tighten. Replace the
power cable access cover and front panel using the removed hardware.