Personalizing Your Phone
57
Logging Your Phone Off
You want to log your phone out of a system area (A, B, C, D).
Even though you can log off your phone yourself, it must always be logged off from the system by the
system administrator.
To be logged off correctly, the phone must be switched on and within the system's radio range.
Your system administrator can then log off the phone in full - on the system and on the phone.
OK
Press the "OK" Foxkey.
The display shows "Searching...". The phone is logged on to the system if
it is available and logging on is authorized.
Note
If logging on to the system is not possible: The display shows "Not OK".
To be reachable, you need to be logged on to at least one system. You can
select a system manually or let the phone select one automatically.
Warning:
Only the system administrator can log a phone back on again.
Note
If your system administrator logged off your phone on the system even
though it was not ready to receive, the system area will remain entered on
your phone and the system administrator will be unable to log your phone
back on to this system area.
If system areas A, B, C, D are occupied, a "><" is displayed accordingly.
You must first log your phone off the relevant system area before you can
obtain the display "New" for logging on again.
<long>
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display shows "System".
System
Press the "System" Foxkey.
The display shows "System:". ..." and the active system (A, B, C, or D) or
Auto.
Press the Menu key.
The display briefly reads "> <".
><
Press the "><" Foxkey.
"ABCD" flashes on the display. The phone is logged off.
