GENERAL DESCRIPTION & SAFETY
Product Description
22-Ton Air/Hydraulic Truck Jack is designed for use with a lifting range of 10.5” to 21.125” and features a large air
motor for an exceptional and quick lifting experience. Its narrow chassis fits between tandem truck wheels and
the large 8” diameter hard rubber wheels allow for easy positioning even in extreme conditions. Additionally,
it comes with three adapters that cater to a variety of working requirements.
Specifications
Capacity
25-Ton
Minimum Height
10 1/2”
Maximum Height
21 1/8”
Air Pressure
0.75-0.85Mpa
Air Inlet Fitting
1/4” NPT
Safety Information
Important: Read these instructions carefully.
NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS JACK CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
Failure to do so may cause damage or personal
injury and will invalidate the warranty. Retain THESE INSTRUCTIONS for future use.
To avoid personal injury or property damage during operation, read and follow all CAUTIONS, WARNINGS and
INSTRUCTIONS, included with or attached to each product.
WE CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY RESULTING FROM UNSAFE USE OF PRODUCT, LACK OF
MAINTENANCE OR INCORRECT PRODUCT AND SYSTEM APPLICATION.
Contact us when in doubt as to safety precautions or applications.
1
Capacity
22-Ton
Minimum Height
10 1/2”
Maximum Height
21 1/8”
Hydraulic Lift Range
6 1/8”
Air Pressure
90-110 PSI
Air Inlet Fitting
1/4” NPT
Weight
102 lbs.
