background image

WARNINGS

1.  Use a qualified person to maintain the jack in good condition. Keep it clean for best and safest 
     performance.
2.  The maximum load is 22-tons. 

DO NOT

 exceed this rated capacity. 

3.  Use this jack for lifting purpose only. 

DO NOT

 use it for any other purpose it is not designed to perform.

4.  Keep children and unauthorized persons away from the work area.
5.  Remove ill fitting clothing. Remove ties, watches, rings and other loose jewelry, and contain long hair.
6.  Wear ANSI approved safety goggles when operating the jack.
7.  Keep proper balance and footing, do not overreach and wear nonslip footwear.
8. Only use this jack on a surface that is stable, level, dry and not slippery, and capable of sustaining the load.
    Keep the surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
9.  When lifting a vehicle, apply the emergency brake and block all wheels.
10. Immediately after lifting, support the load with appropriate supporting equipments such as jack stands 
     of adequate capacity! 

DO NOT 

work under a load which is supported only by a jack.

11. Before lowering load ensure that there are no obstructions underneath and that all persons are standing 
     clear.
12. 

DO NOT 

attempt to move the load while on the jack. The jack must only be used in a static position for 

     lifting and lowering loads. Ensure that the load remains stable at all times.
13. 

DO NOT

 use the jack if damaged, any suspect parts are noted or it has been subjected to a shock load.

14. 

DO NOT

 operate the jack when you are tired or under the influence of alcohol, drugs or any intoxicating 

     medication.
15. 

DO NOT

 allow untrained persons to operate the jack.

16. 

DO NOT 

make any modifications to the jack.

17. 

DO NOT 

use brake fluid or any other improper fluid and avoid mixing different types of oil when adding 

     hydraulic oil. Only a good quality hydraulic jack oil can be used.   
18. 

DO NOT

 expose the jack to rain or any other kind of bad weather.

19. If the jack need repairing and/or there are any parts that need to be replaced, have it repaired by 
     authorized technicians and only use the replacement parts supplied by the manufacturer.
20.

 WARNING: 

The warnings, cautions and instructions discussed in this instruction manual cannot cover all 

     possible conditions and situations that may occur

2

Summary of Contents for 302-19150










Reviews: