manualshive.com logo in svg

ASCOM U922, User Manual, Page: 6 / 22

Share
Download
ASCOM U922 User Manual Download Page 6

2000 01 25 /Rev.A

6

User Manual
Transceiver U922

TD 91836GB

Note:

 To distinguish between different types of pagings the transceiver can be

programmed to flash and beep in different ways, for example with different beep
tones, and with different beep and LED sequences. It is also possible to program
the  tone messages. This is done in the application 

Pocket Unit Programmer 

which

is included in the 

Win900 Base Kit

 software package. See also the section 

Pocket

Unit Programmer 

and the document 

Win900 User Guide

, TD 90838GB.

Viewing and Stepping through Messages

Press the Step-key to view and step between the messages.

Deleting Messages

Display the message to be deleted. Press and hold the C-key until the message is
erased. "*******" is shown briefly when a message is erased.

Receiving Speech Calls

A flashing LED, beep signal and the       icon indicates incoming speech call. Press
the PTT-button to speak, release the PTT-button to listen. Press and hold the C-key
to end.

Storing and Recalling a call number

If the function of the OK button is set to "Store", it is possible to store a call
number for future use. See the section 

Pocket Unit Programmer. 

Enter the call

number using the number-keys. Press the Step-key until "Store" is displayed and
then press OK.

The number can be recalled by pressing a number key and then pressing the Step-
key until "Recall" is displayed. Press OK to recall the call number. Press the PTT-
button to call.

Sending Speech Calls

Enter the call number and press the PTT-button. If “Busy” is displayed, press the
PTT-button twice to redial.

A hot-key can be programmed to send a speech call, a so called speed call. The
programming is done in the application 

Pocket Unit Programmer.

 The speech call is

initiated by pressing the hot-key until the call number is displayed and sent.

Changing Speaker Volume during Speech Call

Press the Step-key to toggle between high/low volume.

Switching the Audible Signal Off

Press OK to enter the menu. Press the Step-key until “Tone?” is displayed. Press
OK to switch between On/Off. A flashing        icon indicates that the signal is off.

s

s

Summary of Contents for U922























Reviews:

No comments