2000 01 25 /Rev.A
5
User Manual
Transceiver U922
TD 91836GB
Red Alarm-button
The alarm transceivers are equipped with a red alarm-button. It is used to transmit
alarms and to test the alarm transceiver and the system.
Red light-emitting diode
Indicates that an alarm/message is sent, and a message and/or new location code is
received. It also shows the charging status when the unit is placed in T962.
Clip
922 is equipped with a clip so that the unit can be fastened to a pocket or another
piece of clothing.
Basic Functions
Press OK to enter the menu and to select menu options. Press the C-key once to
return to the previous menu level. Press and hold the C-key to return to the main
display. Press the Step-key to step between the menu options.
Turning the Transceiver ON
The transceiver is turned on by pressing the
OK button. It automatically starts in the (NORMAL)
initial start-up mode and the pocket unit identity
appears in the display.
Turning the Transceiver OFF
Press OK to enter the menu. Press the Step-key until “OFF?” is displayed, then
press OK.
NOTE: Turning off the unit will erase all messages, unless the Memo function
(option) is activated by the system administrator.
NOTE: The unit consume some current when it is in OFF mode. The battery can
thereby be discharged.
Receiving Text Messages
When U922 receives a paging this is indicated with a beep signal, flashing LED and
vibrator (optional). The new message icon
flashes in the display until the
message is accepted. Press OK to stop the beep signal. If the "A" icon is displayed
you are required to acknowledge within a certain period of time. An acknowledge-
ment beep sounds during that time period. If the message is not acknowledged,
pre-defined actions set in the system are initiated. Press OK to accept/acknowledge
the message. An acknowledge message is then sent.
The symbol " " indicates that the message is longer than 24 characters. A
message can consist of up to 120 characters, i.e. 10 lines (max 12 characters per
line). The transceiver can store up to 10 text messages (max. 480 characters).
Messages longer than two lines are scrolled two lines at a time. When the mes-
sage is accepted, the display will show the next new message. The New message
icon will continue to flash until all messages are accepted.
If all 10 memory positions are occupied when a new paging is received, the oldest
acknowledged message is erased. If all 10 messages are unacknowledged the
oldest unacknowledged message is erased. Depending on the length of the new
message several messages might be erased. The messages are also erased when
batteries are replaced.
Michael 344
0 Msgs.
Menu
Summary of Contents for U922
Page 22: ...User Manual Transceiver U922 ...
